Acard ADR-7216 Manual de usuario Pagina 1

User ManualVersion 1.716CH MPEG4 Standalone DVRADR-7216

2.2 Rear Panel1. FAN 2. 16CH Video Inputs16 channel composite video inputs with BNC connectors . Since this DVR automatically detects video format (NT

8. VGA Output VGA output can be connected to LCD monitor or CRT monitor with progressive scan directly which can receive analog R, G, B and synchroniz

Section3 Installation3.1 Before InstallationThe DVR picture is shown below. First, open the upper casing by using a screwdriver to loosen the screws.

Below are the instructions for connecting the 4 SATA ports on the mainboard of the DVR Four storage device combination options are listed below.Option

3.2 HDD InstallationLoosen the screws holding the two HDD racks in DVR case to remove the HDD rack, then install the HDD in place as shown below using

3.3 DVD-RW InstallationLoosen the four screws holding the DVD-RW rack in place as shown below and remove the DVD-RW rack then. Remove the two screws

Section4 Menu4.1 Menu Display14CAMERAHDDCOPYNETWORK9876No. NAMEICONSCHEDULE5EVENT4RECORDING3DISPLAY2SYSTEM1NAMEICONNo. Menu IconsCAMERAHDDCOPYNETWORK9

4.2 Menu Tree15CAMERA9HDD 8COPY7NETWORK6SCHEDULE5EVENT4RECORD3DISPLAY2SYSTEM1NTP TIME SYNCTIME ZONEPORTDNSGATEWAYSUBNETIP ADDRESSCONNECTCD/DVD FORMATB

<Enter the Menu >For the first time using your DVR, you will want to establish the initial settings. This includes setting items suc

4.3 SYSTEMTo access SYSTEM SETUP, press ENTER button after moving highlight icon to SYSTEM in MAIN MENU. Below menu will be appeared on monitor. 1) LA

2) VIDEO FORMAT: NTSC/ PAL Video format is automatically detected after power ON. The detected video information will be displayed on VIDEO FORMAT. Us

5) SUB-USERS : NOTE: This function is available only in ADMIN LOCK with “YES”. Sub-User function can provide multiple user with the differentiated DVR

<The procedure for SUB-USER password modification>The initial password for SUB-USER is same as ADMIN’s password, “11111111”. The modification fo

If SETUP (for MENU configuration setup) for the user isn’t set as “On” by ADMIN in advance, below error message, “ACCESS DENIED!” will be appeared on

How to use Remote ID: Remote ID in REMOTE ID of SYSTEM MENU of DVR can be set by manual or mouse. Each DVR can have REMOTE ID from 01to 16. Factory in

9) DATE/ TIME SET : Move Highlight icon to DATE/TIME SET in the SYSTEM Menu using DOWN or UP button. And then press ENTER to set the time. Below GUI w

12) UPGRADE Firmware can be upgraded through USB memory driver. For more detail information, Please see “Section9 F/W Upgrade” NOTE: When all of menu

4.4 DISPLAYTo access DISPLAY SETUP, press ENTER button after moving highlight icon to DISPLAY in MAIN MENU. DISPLAY SETUP will appear on monitor. 1) S

4) CAM NO OSD: ON/ OFF When it is set as OFF, characters which indicates camera number will be disappeared on monitor. CAM NO OSD ON/ OFF can be chang

4.5 RECORDTo access RECORDING SETUP, press ENTER button after moving highlight icon to RECORD in MAIN MENU. RECORDING SETUP will appea

StatementThe information of the product in this manual is subject to change without prior notice and does not represent a commitment on the part of ve

2) REC SETTING - Resolution: FULL (4 CIF, D1), HALF(2 CIF, Half D1), NORMAL (CIF) - Quality: VERY LOW, LOW, STANDARD, HIGH, VERY HIGH - FPS: 30

4.6 EVENT4.If EVENT is selected by ENTER button, below “EVENT SETUP” figure will be appeared. All the parameters related to EVENT Recordin

2) Event Setup2 parameter Setting3) MOTION AREA CH and 4) MOTION AREA Whenever ENTER button is pressed, marking within above red circle will changed

4.7 SCHEDULESCHEDULE in the main menu can be selected by movement button such as LEFT, RIGHT or UP, DOWN button. If SCHEDULE is selected by

2) Weekly SET If “Weekly SET” is selected, below figure will be appeared. It is possible to configure ALARM, MOTION and MANUAL together in Weekly SET

4.8 NETWORKIf NETWORK is selected by ENTER button, below “NETWORK SETUP” figure will be appeared.1) CONNECT: STATIC or DHCP STATIC IP or DHCP of CONNE

For assigning IP ADDRESS, SUBNET, GATEWAY and DNS in STATIC IP mode, ENTER button can be pressed on the column of IP address, SUBNET, GATEWAY and DNS.

8) NTP TIME SYNC: OFF/ON DVR can synchronize “standard time” with Time Server using Network Time Protocol. NOTE: If DNS server is not set properly in

4.9 COPY(BACKUP) BACKUP in the main menu can be selected by movement button such as LEFT, RIGHT or UP, DOWN button. If BACKUP is selected by ENTER

4.10 HARD DISKHDD DISK in the main menu can be selected by movement button such as LEFT, RIGHT or UP , DOWN button. If HDD is selected by ENTER button

Table of ContentsSection1 Introduction...

2) FORMAT HDD: This support quick HDD format function. In order to format HDD in FORMAT HDD, after pressing ENTER button, “YES” or “NO” can be se

4.11 CAMERACAMERA in the main menu can be selected by movement button such as LEFT, RIGHT or UP, DOWN button. If CAMERA is selected by ENTER button, b

3) PTZ TYPE (Pan, Tilt and zooming protocol selection ): Panasonic/ Pelco-D/ PelcoP/ Techwin/ Niko/ DRX502A_DSC230s /KRE_301_302/ GC_755_NP/ TOA_CC554

Section5 Searching for Playback If search button is pressed for playback, all the search list with calendar style as below figure will be appeared. Th

Section6 Live Display There are some of live display modes such as single (as full), QUAD, 9 picture, 16 picture.Status Symbols description42Live audi

Section7 Backup using USB memory driver, CD or DVD 1) In order to search the file which is needed to copy in USB memory or CD or DVR, search button of

4) If COPY(BACKUP) time is decided by ENTER button, Below GUI will be appeared. The channel(s) which want to copy can be selected here. According to c

Section8 PTZ Control NOTE: Before using PTZ control mode, please check that PTZ protocol in PTZ TYPE of CAMERA SETTING is correctly selected. 45a) Sel

Section9 F/W Upgrade1) Copy upgrade firmware file, “dvr535352xx.tgz” into USB Memory Drive in advance. 2) Insert USB Memory Drive into USB port in fro

6) While “Please wait” is appearing, F/W upgrade will be executed. It takes around 10 minutes. After completing F/W upgrade, your DVR will be automati

Section1 Introduction1.1 OverviewDesigned for globally increasing surveillance requirements, ADR-7216 is a high performance standalone Digital V

Section10 Client Software10.1 Client Software (NetViewer, File Player, CMS) Installation CAUTION: If an older version of Client software or similar vi

494) Please select installation style in following dialog box. “Complete”can selected for normal installation. And then click Next.5) Please wait for

Note: Client Software consist of NetViewer, File Player and CMS. Requested PC System for Client Software are as below:● Operation System: MS Windows

2) Network Connection When this “CONNECT” icon is clicked, below “CONNECT ADDRESS” window will be appeared. A) How to add “CONNECT ADDRESS” ● NAM

“USER” and “ PASSWORD”, new “CONNECT ADDRESS” will be enrolled in address list. NOTE: One of easier way to add “CONNECT ADDRESS” is to click “ADD” aft

4)Display Widow Selection Note: If one of 16ch pictures is double-clicked, the channel will become to be full picture. It return to 16 picture display

6)Local Setting When the “LOCAL SETTING” icon, of Main GUI is clicked, above sub-menu related to local setting will be appeared in main GUI. LOCAL SET

7)Remote SettingA) System configuration Video Format Video format is automatically detected after DVR power ON. The detected video information

TIME DATE OSG It defines that time and date OSG is added or deleted in display picture. POPUP It defines POP UP picture can be displayed as

FRAME RATE: 60, 30, 15, 10, 5, 1, 0.5 IPS.(NTSC) AUDIO: ON/ OFF It defines whether audio signal with video together can be recorded or not

● External Storage Expansion：eSATA Interface Alarm● Alarm Input：16● Alarm Output：4 Network● Live video access● Recorded video access● Recorded vid

F) EVENT SELECT CH: Recording parameters of video channel from CH1 to CH16 including quality, frame rate and so on can be adjusted separately. B

59H) MONTH SCHEDULE1234Any day of a week from Monday to Sunday and any time of 24 hour can be reservedfor MONTH SCHEDULE recording. Rowof MONTH SCHEDU

8)REMOTE SEARCH (for Playback and File downloading) 60I) HDD“Total size” in shows the total capacity of all the HDD in DVR. “Free size” in

61Playback procedure can be followed from to .Select “date” for PB.Select “channel” for PB.Select “hour” for PB.Select “minute” for PB.Cli

10)CAPTURE (Picture saving and Printing) 621“CAPTURE” can be utilized for not only single picture saving but also picture printing.When “CAPTURE” icon

6323When “SAVE” icon is pressed, below sub-GUI of “SAVE” will be appeared and picture saving path will be requested as below figure. The file

11)Record12)MIC ON, Volume Control and Mute 64“RECORD” can be utilized for saving live picture coming from remote DVR in local PC. If there is no chan

13)Event Notification (Alarm, Motion) from remote DVR 654Mute ON or OFF can be selectable by “MUTE” icon. If “MUTE” icon is pressed for muting audio

10.3 File Play Software66< File Player Program >1234567891011< Icon Description >File OpenThis “File Open” selection is for playback one r

67SettingIt is used for OSD addition/ Deletion and directory assignment for local file saving as below figure. The OSD with channel and time informati

Section2 Appearance2.1 Front Panel1. DVD-RWThis can be used for backup video. 2. Jog and Shuttle Jog and shuttle enable user to operate DVR eas

4) Single Channel Select “Each of 16 channel can be selected for full screen display by “ single channel select”10) Capture< CAPTURE procedure >

Step3 Then, this GUI will be appeared for path assignment to save “CAPTURE” image.Click “Confirm” (or “OK”) 11) File Conversion ( from MPEG4 to AVI)T

10.4 CMS Software1) Main GUI of NetViewer Software 70E-MAP display14Program Exit13Local Setting for OSD display and saving directory.4Display Channel

2) Network ConnectionA) How to add Group in CONNECT GROUP for multiple DVR monitoring71When “CONNECT” icon in main Window of CMS is clicked, below “C

B) How to add DVR in selected groupExample721Click “Group” If the “Group” is selected, same Group name will be appeared. NAME => MTG rmADDRES:

B) How to delete DVR in selected groupC) How to modify DVR in selected group73Click “ DELETE”2First, click what to delete1Click “ MODIFY”3First, click

D) How to start CMS monitoring741Click “Group” Click “CONNECT” for CMS monitoring. 2

E) How to delete groupF) How to modify (Rename) group75First, Select the Group which want to delete1Click “Delete Group”2First, Select the Group which

G) DVR movement between Group3) Network Disconnection76If CMS_test1 is double-clicked, below detail items will be appeared.1Any item of one Group can

**Below Function is the same as NetViewer software function. Please refer to 10.2 NetViewer Software**4) Display Widow Selection5) PTZ Control6) Local

4. Channel Selection buttons Channel selection button from CH1 to CH16 can be used to display given channel on monitor. 5. Function buttons1) FUNC

APPENDIX 1. Pin Description of connectors 78No connected 15No connected 7SYNC6No connected 5No connected 4B3G2R1Pin description Pin NO.SHIELD5GND4D+(

794. Alarm Input & Outputs Pin Descriptions1 1Sensor input 067Sensor input 056GND (Common)5Sensor input 044Sensor input 033Sensor input 022Sensor

10) PLAY/ PAUSE button If this button is pressed, playback picture will be frozen. If it is pressed again, playback will be restarted. 11) STOP button