Acard AEC-67160M Ultra160 Manual de usuario

ARS-2016/2016EMirror Smart 160 User’s ManualCopyright © 2003 ACARD Technology Corp. Release: August 2003Version: 1.0

10ARS-2016/2016E ManualPlease visit www.acard.com for the newest information.MAXTOR-D740X-6L080L4 (80GB)MAXTOR-D740X-6L020J1 (20GB)SEAGATE Barracuda I

11 ARS-2016/2016E ManualChapter 3 The Control PanelARS-2016/2016E has a control panel composed of 5 LEDs and an alarm-off reset

12ARS-2016/2016E ManualThe control panel of ARS-2016/2016E is described in details below.l During normal operation, if the system detects a failed ha

13 ARS-2016/2016E ManualUnder different situations the beep of warning is different.(1). The warning for a failed fan is a short

14ARS-2016/2016E ManualChapter 4 Hardware InstallationThe hardware installation includes the installation of a SCSI adapter and that ofARS-2016/2016E

15 ARS-2016/2016E Manuall When rebuilding finishes, ARS-2016E will produce a long beep.l When HOT SWAP is progressing, the syste

16ARS-2016/2016E ManualBefore connecting an IDE hard drive to the cabinet, you have to power off the sys-tem, then follow the two steps below to open

17 ARS-2016/2016E Manual Figure 4-34.2.3 External Power ConnectionAfter connecting the IDE hard drive to the cabinet of AR

18ARS-2016/2016E Manual4.2.4 External Cable ConnectionNow you can follow the directions below to connect your ARS-2016E(s).Step 1: Identify the LVD SC

19 ARS-2016/2016E Manual Connect toSCSI AdapterPower Cord LVD SCSI Cable Figure 4-64.2.5 DIP Switch SettingThe DIP

Copyright and TrademarksThe information of the products in this manual is subject to change withoutprior notice and does not represent a commitment on

20ARS-2016/2016E ManualPlease follow the instructions below to set DIP switch properly.Give a unique SCSI ID number to each ARS-2016E in a daisy chain

21 ARS-2016/2016E ManualID=0 ID=1(Default)ID=2 ID=3ID=4 ID=5ID=6 ID=7 N/A (reserved for h

22ARS-2016/2016E ManualThe SCSI ID number in ARS-2016 is illustrated below.ID=0 ID=1(Default)ID=2 ID=3ID=4 ID=5ID=6 ID=7

23 ARS-2016/2016E ManualChapter 5 TroubleshootingThis chapter is divided into two main sections: basic troubleshooting and adva

24ARS-2016/2016E Manual5.2 Advanced TroubleshootingLet’s explain the troubleshooting of ARS-2016E in Windows XP. At first, set the IDnumber of the SC

25 ARS-2016/2016E ManualStep 2. Double click “Control Panel” to select “Printers and Other Hardware”.

26ARS-2016/2016E ManualStep 3. Double click “Printers and Other Hardware” to select “System”.Figure 5-3

27 ARS-2016/2016E ManualStep 4. Double click “System” to select “System Properties”. In “System Properties”click “Hardware” and

28ARS-2016/2016E ManualStep 5. In “Device Manager” double click “SCSI and RAID controllers” to check ifthe SCSI host adapter, AEC-67160 is installed w

29 ARS-2016/2016E Manual5.2.2 Verify ARS-2016EIf you can find ARS-2016E, the Mirror Smart 160 which you have installed withAEC-6

Table of ContentsChapter 1 About SCSIDE ... 41.1 Revolutionary Technology...41.2

30ARS-2016/2016E ManualStep 2. Double click “ATA MirrorSmart 160 SCSI Disk Device”. Then, click “Gen-eral”, and in “Device Status” inspect if ARS-2016

31 ARS-2016/2016E ManualAppendix 1 SCSI Adapter CompatibilityAll the SCSI adapters listed below can be used together with ARS-2

32ARS-2016/2016E ManualAppendix 2 Mirror Smart UtilityThe Mirror Smart Utility is used to manage and control ARS-2016/2016E. With ityou can easily se

33 ARS-2016/2016E ManualThe main items in “Preference” are explained as follows. 1. 2. 3. 4.

34ARS-2016/2016E ManualIf you want to set the functions of Mirror Smart, you can click “Setup” and select“Mirror Smart Setup” as shown below.

35 ARS-2016/2016E ManualThe main items in “Mirror Smart Setup” are explained as follows.1. Set to read the 2 hard drives’ data i

36ARS-2016/2016E ManualIf you want to change the size of Mirror Smart, you can click “Setup” and select“Change Mirror Size” as shown below.1. Set a ne

37 ARS-2016/2016E ManualIf you want to update the firmware of Mirror Smart, you can click “Setup” and select“Update Firmware” as

38ARS-2016/2016E ManualIf you want to receive a mail whenever a hard drive fails, you can click “Setup” andselect “Mail Notification Setup” as shown b

39 ARS-2016/2016E ManualThen click “Supervisor”, and type the receiver’s mail address in the row near to thebottom. After clicki

4ARS-2016/2016E ManualChapter 1 About SCSIDE1.1 Revolutionary TechnologySCSIDE® is a revolutionary technology developed by ACARD Technology Corp. It

40ARS-2016/2016E ManualIf you want to know the version of Mirror Smart Utility, you can click “About!”.Click “Status List” to see the status of Mirror

41 ARS-2016/2016E ManualClick “Mirror Info” to see all the information about the hard drives. 1.

42ARS-2016/2016E ManualClick “Compare HDDs” to see if the Source HDD and the Target HDD contain thesame data. The percentage bar on the bottom of the

43 ARS-2016/2016E ManualIf a hard drive is detected not existing or having an error, the status will be shown asthe figure.

44ARS-2016/2016E ManualIf you want to read the record of an event log, click “Open Event Log” under “EventLog”. Then, choose the file you need.

45 ARS-2016/2016E ManualClick the file to read as the following figure shows.The “Event Log” describes the status of every event

46ARS-2016/2016E ManualTechnical Support FormEmail: [email protected]://www.acard.comModel: ARS-2016/2016E F/W Version:System Configu

5 ARS-2016/2016E Manual1.2 SCSIDE® DesignThe objectives of SCSIDE® design are given as follows:1. Save the expenses of SCSI by

6ARS-2016/2016E ManualChapter 2 Introduction2.1 OverviewARS-2016 and ARS-2016E Ultra 160 SCSI RAID 1 System are designed formirroring. The only diff

7 ARS-2016/2016E Manual2.3 Quick StartThe following 8 steps are for ARS-2016.Step 1: Make sure that all cables are connected fi

8ARS-2016/2016E ManualStep 5: Make sure that the auto-eject handle on the cabinet is closed.Step 6: Remove another cabinet and repeat step 3 to 5.Step

9 ARS-2016/2016E Manual2.6 CompatibilityARS-2016/2016E is particularly designed for DMA hard drives. It fully supports thefollo