Acard PCI-to-IDE ATA-133 Manual de usuario descargar pdf (Pagina 18)

Page 18

drive letter), then click OK

4. At the Found New Hardware Wizard, click Next.

5. Select Search for a suitable driver for my device

(recommended) and click Next.

6. Check the option Specify a location and then click Next to

continue.

7. Click Next again, then Finish.

8. Restart Windows to complete driver installation

For Windows® XP/Server 2003

For New Windows® XP/Server 2003 Installation

A new installation requires a floppy disk for the driver

installation. To make this floppy disk, copy the contents of

the “

DS-33104\2K_XP_2003_Vista” folder, found on the driver CD,

onto a blank floppy disk then follow the directions below.

1. Setup the RAID Array prior to Windows installation.

2. Install the board and follow Microsoft procedures to install

Windows ®XP/Server 2003 accordingly.

3. Restart your system when prompted during Windows’ installation.

4. At the Windows XP/Server 2003 screen, press F6 to install the

1 2 ... 13 14 15 16 17 18 19 20 21 22

Sin comentarios

Acard PCI-to-IDE ATA-133 Manual de usuario Pagina 18